I am walking around for a little while to build my own kiteboard. Just the thought of stuff that you need was making me a little discouraged but I am getting there.
A drawing of my rocker table. Just got all my items in today to build this bad ass thing:
Clarification of the sketch:
The frame will be build out of 2 x 4. Total length of 155 by 50 wide. The skinny black lines shaped in a board will be the actual table. Still need to go to home depot to get this part but I think I will be using triplex (or if I can find something more flexible ill used that).
The gray things are threaded metal rods. I will be drilling holes in my rocker board, so I can adjust the total rocker of the board by just adjusting the nods on the rods. Sounds all complicated, maybe it is but it might be useful as well. In the center I will be using a 1 inch strip of wood for concave.
Core for the board:
Waiting for my Foam to come in. Still doing some research of going with PVC core or Styro core.
From kytbord! Keeping you guys posted about this crazy project